To secure a screw assembly, it is not enough to screw on the screw or bolt and then tighten it to the recommended tension. It is also necessary to use a threading locking mechanism to prevent undesired loosening due to vibrations, impact or thermal expansion.
There are many different techniques, but the most common involves placing a drop of thread lock (anaerobic adhesive) on the threading of the threaded mounting hardware: screws, nuts, dowels, threaded stems, stoppers…
This is an efficient thread lock solution as it can be used to glue both parts of the assembly, but it is costly to implement and results may vary.
Liquid thread lock has therefore been replaced, for many applications, by threading pre-coated with adhesive.
This technique involves pre-coating the threaded hardware with a microencapsulated adhesive that only activates during assembly. When the screw or bolt is tightened, the adhesive released by the bursting of the microcapsules mixes with the hardening agent and glues the threaded parts together like a traditional thread lock.
The assemblies unscrew because of the vibrations, shocks and thermic dilatations. Numerous technologies have been developed in order to secure the screwed assemblies to avoid untimely unscrewing. The most efficient solution against unscrewing is to bond the threads by the pre-coat technology.
The technique consists in pre-coating the threads with a microencapsulated adhesive which is activated only while screwing. Upon assembly, the adhesive components are released and creates a bond between the male and female threads. It is the most effective anti-unscrewing solution.
The pre-coated fasteners replace the common thread locking solutions thanks to utmost technical performances and economical advantages:
Excellent performances: excellent resistance against vibrations
Easy conception: replaces standard screws without a re-conception of the assembly
Rapid assembly: no need of a washer nor adhesive
Technical control: the deposed volume of the pre-coating product on the assembly is always the same
Excellent quality: no omission possible of the coating process
Important reduction of the assembly costs: high productivity in workshop and on construction site
Suppression of the hygienic and security problems due to the fluid adhesives
CHARACTERISTICS AND PRODUCTS
The pre-coating products that we apply come from long partnerships with many manufacturers.
Low strength and sealing
Green or Pink
Low strength with controlled torque
Our processes are ISO 9001 certified and fulfill specific requirements in the automotive industry.
Our products are approved to many standards:
Renault CDC 39.02.010
FORD WX200 & 201
En poursuivant votre navigation, vous acceptez l’utilisation des cookies à des fins de services et mesure d’audience. Pour obtenir plus d’informations sur les cookies, cliquez-ici
Les paramètres des cookies sur ce site sont définis sur « accepter les cookies » pour vous offrir la meilleure expérience de navigation possible. Si vous continuez à utiliser ce site sans changer vos paramètres de cookies ou si vous cliquez sur "Accepter" ci-dessous, vous consentez à cela.